XiangWang PCB Assembly Factory
Blog Home > Blog >

PCBA RFQ Checklist: What to Send for an Accurate Assembly Quote

Published on: Nov 19,2026       Pageviews: 5
Share:

At XWONDER, we review the board files, parts list, and build instructions together when preparing a PCB assembly quote. If one file is missing or belongs to a different build, we need to know which requirements are confirmed and which still need an engineering decision.

Send the PCB manufacturing data, bill of materials, pick-and-place file, and assembly drawing for the intended build. Include the order quantity, target delivery date, sourcing responsibilities, and applicable test and acceptance requirements. If anything is missing, record it in the RFQ and ask the assembler to state what its estimate includes, assumes, or leaves open.

What Should You Send for a PCB Assembly Quote?

Project Summary and Quantity

Start with the assembly part number, build revision and variant, and project stage. State the initial order quantity in assembled units, the target delivery date, and the destination. List any additional quantities you want quoted and label the annual forecast separately.

Manufacturing Files and Build Requirements

RFQ inputWhat to sendWhat it clarifies
PCB manufacturing dataGerber and drill files or an agreed manufacturing data package, such as ODB++ or IPC-2581. Include the board outline, paste data and applicable fabrication notes.Which board to build or assemble. If you supply the bare boards, identify their revision and who is responsible for panelization.
Bill of materials (BOM)Editable spreadsheet with manufacturer and exact MPN, reference designators, quantity per board, footprint or package, and do-not-populate (DNP) status. Identify approved alternatives and customer-supplied items.Which parts are fitted, which parts are purchased, and which substitutions are authorized.
Pick-and-place file (CPL)Centroid data with reference designator, X/Y coordinates, rotation and board side. State units and origin and identify whether it is a single-board or panel export.Where components go and whether the positional data matches the assembly variant.
Assembly drawingTop and bottom views as applicable, polarity and pin-one callouts, connector orientation, and any manual assembly or workmanship notes.How parts are oriented and which instructions apply beyond standard placement.
Supply responsibilitiesSpecify turnkey, consigned, or mixed sourcing. For mixed sourcing, mark the owner by line item and state who approves substitutions.Who supplies bare boards and parts, and which open sourcing decisions can affect the quote.
Inspection, test and deliveryState the applicable acceptance criteria, inspection and test scope, programming, labeling, traceability, packaging, and any special operations. For functional testing, include the procedure, limits, coverage and fixture ownership when available.What the supplier must verify, record and ship. Flag any requirement that is still in development.
PCB assembly RFQ package with a central build summary linked to PCB fabrication files, a bill of materials, pick-and-place data, and an assembly drawing.
PCB Assembly RFQ Package
The build summary tells the assembler which documents apply to the requested job.

See our turnkey PCBA manufacturing guide for how those files carry forward into sourcing, engineering review and assembly.

How Do You Check That Your RFQ Files Match?

Use One File List for the Quoted Build

Put a file list at the top of the package. For each attachment, record its filename, document revision, release status, and the assembly revision and variant it supports. The BOM and drawing can have different document revisions as long as both apply to the same assembly build. Name the RFQ package version separately so the supplier can reference it in its reply.

Reconcile the BOM, Placement Data, and Drawing

  1. BOM to CPL: match fitted SMT designators to placement entries. Flag any DNP position still listed in the CPL and identify hand-installed parts in the assembly instructions.
  2. CPL to board data: confirm the board side, units, origin and rotation convention. Check panel coordinates separately if the placement export is panel-based.
  3. Drawing to physical assembly: confirm pin one, polarized parts and connector orientation. Clarify variant-specific markings and any operations performed after placement.
Bill of materials, pick-and-place data, and assembly drawing cross-checked for the same build variant, with a matching connector entry and pin-one orientation highlighted.
Cross-Check the RFQ Files
Check the assembly variant, fitted reference designators, and orientation across files.

What Can a Supplier Quote When Files Are Missing?

You can ask for a budgetary estimate while engineering completes the package. Tell the supplier exactly what is missing and request a written basis for any estimate. A provisional scope can support planning. A reviewed quotation requires agreement on the scope it covers. Production release requires the applicable approved build documents.

Missing or incomplete inputWhat to send nowWhat closes the gap
No CPLProvide available design data, a populated BOM and a marked assembly view if available. Ask whether the assembler can give a provisional review or needs a specific CAD export.Export and reconcile placement data for the intended assembly. Confirm how positions, rotation and units are encoded.
Incomplete BOMFlag rows with missing MPNs or unapproved alternatives. Ask the supplier to quote verified lines and identify how it treats the open lines.Confirm the exact MPN or approve an alternate in writing. Ask the supplier to reconfirm sourcing and lead time.
No assembly drawingShare marked top and bottom views with polarity, connector seating, and any hand-assembly notes you can confirm. Identify the views as preliminary.Issue or approve the applicable assembly instructions, including special requirements and orientation callouts.
No released test procedureState what must be verified and identify the draft procedure, limits or fixture details still pending. Ask the supplier to identify the status of fixture work and recurring testing separately.Approve test coverage, pass/fail criteria, the fixture and its owner, execution responsibility, and required records.

For projects with an open inspection or test decision, use our PCBA inspection and testing guide to identify which checks need to be specified in the RFQ.

What Does a Missing-File RFQ Look Like in Practice?

Illustrative Example — Industrial Controller Pilot Build

An OEM needs a quote for 100 assembled units of Controller A, assembly Rev C, pilot variant. Its first RFQ includes board manufacturing data, a BOM and an assembly drawing. The CPL is missing, and the functional test procedure is still in draft. The BOM marks R28 as DNP for this pilot variant.

Open itemOwner and next actionRequested quote basis
CPL missingPCB designer exports the pilot variant and confirms the treatment of R28.Ask for a budgetary assembly estimate based on the listed fitted parts if the assembler can provide one. Mark placement review as pending.
Functional test procedure pendingTest engineer supplies approved coverage, limits and the fixture plan.Ask the supplier to mark fixture work and board testing individually as included, provisional, excluded or pending.

When the CPL arrives, it still lists R28 because the export includes all placement positions. The designer confirms R28 remains unpopulated and issues a pilot-variant export consistent with the BOM. The buyer then sends the new file list and asks the assembler to reconfirm the fitted scope and flag any change to the quote or delivery timing. The test procedure stays open until its own approval and quotation review are complete.

PCB assembly RFQ example showing two separate workstreams: a corrected placement file and a functional test procedure still awaiting approval.
Missing-File RFQ Case
The placement file and functional test procedure have separate owners and closure steps.

How Should You Update the RFQ After Sending Missing Files?

Resend the File List and Identify What Changed

Send a new RFQ package version or a controlled update with a replacement manifest. State which attachment replaces which, which requirements have changed, and which items are still open. Ask the supplier to reference the new package in its quotation and state the impact on scope, lead time and any terms that depend on unresolved requirements.

Give the Supplier a Clear Reply Format

Subject: RFQ update | Controller A | Rev C pilot | 100 assemblies | Package 02

Updated: Pilot CPL added. R28 is DNP per the pilot BOM.

Still open: Functional test procedure and fixture ownership.

Please confirm: Package version, fitted variant, quoted scope, excluded or provisional items, and any effect on lead time. Flag any remaining document or approval needed to finalize the quote.

Corrected PCB assembly files and a revised RFQ manifest linked to a supplier reply that confirms scope and lead time and flags the test procedure and fixture responsibility as pending.
From Follow-Up Files to Supplier Confirmation
Reference the new package in the supplier reply and keep remaining approvals visible.

If you are inviting multiple suppliers, send the same update to each one. For the broader evaluation, see how to compare PCB assembly suppliers.

Which XWONDER PCBA Projects Illustrate Different RFQ Requirements?

Use these examples to identify application details to include in your own RFQ. For example, specify connector orientation for a telematics board, firmware and programming scope for a smartwatch mainboard, sensor inputs and verification for a temperature controller, and functional I/O checks for an industrial main board when applicable.

What Else Should You Clarify Before Sending a PCBA RFQ?

Can I Request a Quote With Only Gerber Files and a BOM?

Yes. Send them with the intended variant, quantities, and a list of missing files. The supplier can tell you which work it can estimate and what it needs before it can confirm the assembly scope. When you provide the bare boards, identify that responsibility and confirm which board data the assembler still needs.

What If I Have Multiple Variants on the Same Bare PCB?

List each assembly part number, its fitted parts and DNP positions, and its requested quantity. Map the applicable BOM, placement export, drawing and test requirements to each variant. Where files are shared, document the variant-specific instructions explicitly.

Do I Need to Send Firmware With the First RFQ?

State whether programming is required and describe the expected device, tool, interface and verification step. If the image or procedure is still in development, flag it in the file list and agree on how the supplier should scope programming. Arrange a suitable transfer method for approved firmware and any sensitive files.

Which Quantity Should I Provide for a Pilot Build?

Give the planned pilot order quantity first. Add the quantity breaks you want priced and mark future demand as a forecast. If the production variant changes after the pilot, specify which files and requirements apply to each quoted build.

Ready to Share Your PCBA RFQ?

Tell us what you need to build, the quantity and target date, and which files you already have. If any requirements are open, include them in your inquiry so we can review the quotation scope with you.

Request a PCBA Quote
Copyright © Shanghai XiangWang(XW) Electronics Equipment Co., Ltd pcba manufacturing Powered by bomin